Metric Washers Kit Plates - Ready to print
Print Profile(1)
Bill of Materials
Description
Read the following instructions before printing. The most common sizes of metric washers in one file, just print and use.
No more loose washers flying everywhere on built plate removal. This file includes the most common washers from size M1.6 up M24. The washers are grouped by 4 units with a size tag. Thickness varies according to the diameter
Included dimensions :
| Thickness of washers | Nominal size | |||||||||
| 1.0 mm thick | M 1.6 | M 2 | M 2.5 | M 3 | M 3.5 | M 4 | M 5 | M6 | M 7 | M 8 |
| 1.6 mm thick | M 10 | M 12 | M 14 | M 16 | M 18 | |||||
| 2 mm thick | M 20 | M 22 | M 24 | |||||||
- Plates 1 and 2 : Kit plates washers design pre-attached with a size tag. Detach and use. Thickness varies with diameter, check the drawing.
- Plate 3 : Individual washers, you can rescale them in "Z" for any thickness you want or to create a tube bushing.
Printing: No support required, ready to print. Print profile is set to a circular motion (Archimed). Do not fill the plate with a ton of objects, keep the qty of kit cards to a reasonable amount to allow for quick layer completion and help with layer adhesion and avoid printing issues. The yellow objects in the print file are modifiers to change the top layer stype to help read the size emboss. They will not be printed.
Removal from the build plate :The plate must be cooled down completely prior to removing the kit plates, removal from a hot plate will break the fine brims holding the washers. Use a thin plastic scraper to gently pry up the brim lines.
Print by objects : Ideal to empty spools with lot filament remaining. Just use the setting "Print by Objects" so the printer will print the kit plates one after the other. Instructions here : https://wiki.bambulab.com/en/software/bambu-studio/sequent-print
Adapt the print to your material : ASA, PETG, ABS, TPU, PLA.
Boost Me (for free)
Say thank you with a BOOST, it's FREE for you.
Licence and terms of use :
When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.
You can :
(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.
You cannot :
(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made. This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location.
(X) Share the digital file(s) or resell them.
Liability disclaimer and use:
By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts. The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (48)