Macuso

Pass through

3D Journey

Great make. Easy to print, works well, does not use much material. I adapted the front distance keeper so I could put an analog hygrometer.

user_346997752

Mainframe

illuk971

user_1122731785

Gibt es für die Einzelaufhängung eine stl?

Is there an stl for the individual suspension

Snakesworld

Mir gefällt die Aufhängung der Spulen weil diese sich sehr einfach drehen. Besonders beim Drucken mit TPU ist das sehr gut da sich das Filament nicht so sehr dehnt aber nach einiger Zeit Gebrauch habe ich beim Spulenwechsel immer wieder das Problem, dass die Spulen nicht einzeln entnommen werden konnten. Herausnehmen und die Spulenhalter wieder montieren waren eine echte Herausforderung. Ich habe es danach modifiziert und Einzelaufhängung möglich gemacht. Jetzt funktioniert es prima. 

I like the suspension of the spools because they rotate very easily. This is especially good when printing with TPU because the filament does not stretch as much, but after some time of use, when changing spools, I always had the problem that the spools could not be removed individually. Removing them and remounting the spool holders was a real challenge. I modified it afterwards and made individual suspension possible. Now it works great

Babush

after a few weeks of use , I found that desing was poorly made because of the shakenness and long arms of the holders

Max Conrad

Barrels

Bienchen 3D

cliobaba

Printed in PLA and square??? rod didnt fit bearings inner diametr ....

Insgesamt nun schon 16 mal gedruckt. Immer Problemlos! Funktioniert gut.

Printed a total of 16 times now. Always without problems! Works well

Carsten

Distance Keeper when not using screws.

cover

IMG_2104.jpeg

IMG_2103.jpeg

IMG_2102.jpeg

IMG_2101.jpeg

IMG_2099.jpeg

IMG_2108.jpeg

2.png

3.png

plate_1.png

Best with PETG.Two 6mm PTFE Connector needed.

IMG_2100.jpeg

Rod for the Bearings

Bildschirmfoto 2025-02-13 um 18.10.54.jpg

IMG_2109.jpg

1.png

If you do not like screws.This is to keep the frame in the right place.PETG or PLA.

IMG_2098.jpeg

Feet

2024-11-10_463fe5200ed5a.jpg.webp

PTFE Plug

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Complete and stable solution with minimal expense for the IKEA 365 10,6L Box.Small construction to print it also with an A1 Mini.&nbsp;4x 608 Bearings3x 3mm Allen Key Screws.2x 6mm PTFE Connectors.&nbsp;Without screws and feet you can use the Distance Keepers,to exactly position the Mainframe.Easy print with PETG.&nbsp;

Print Profile(7)

Description

Comment & Rating (31)

License

Related Models

IKEA 365 10,6L Filament Dryer Box

Print Profile(7)

Description

Comment & Rating (31)

License

Related Models