Aquarium air hose restrictor

Search models, users, collections, and posts

BHMarten

Household>Pets

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 90% infill

Designer

32 min

1 plate

4.9(57)

0.mm layer, 3 walls, 30% infill

33 min

1 plate

4.3(8)

Open in Bambu Studio

Boost

214

567

970

736

Released

Description

Please consider a Boost Token reward, if you like the model, thank you.

You can find other interesting models in my profile. - https://makerworld.com/en/@BHMarten

Comment & Rating (97)

@user_1081280639

Boosted

Print Profile

0.16mm layer, 2 walls, 90% infill

printed perfectly thank you have a boost

The profile uploader has replied

@BHMarten

thx

@CraftyPotato

Boosted

Print Profile

0.16mm layer, 2 walls, 90% infill

printed out great! I printed it in PLA cos that's all I've got. It's doing a pretty good job!

@Pambuke

Print Profile

0.16mm layer, 2 walls, 90% infill

Very helpful and printed well.

(Edited)

@HAMMER_T

Print Profile

0.16mm layer, 2 walls, 90% infill

Prints well

@68Fastback

Boosted

Print Profile

0.16mm layer, 2 walls, 90% infill

works well. have to tighten down pretty far for it to restrict any air.

@user_3760100071

Boosted

Print Profile

0.16mm layer, 2 walls, 90% infill

Works great. First time you need a bit more force to screw it in but then its really smooth. Removing the support is a bit annoying might be better using tree support.

@NeilTheMaker

Print Profile

0.16mm layer, 2 walls, 90% infill

great print perfect I added a brim because it knocked over first try.

@user_1254620183

Boosted

Print Profile

0.16mm layer, 2 walls, 90% infill

Good to go.

@didiere

The print profile is no longer public

Strength Issue: A really useful model, but needs to be fixed

Other Issues: The fit is too tight Doesn’t want to screw, please fix

The profile uploader has replied

@BHMarten

try updated PETG print profile

@user_2166344243

Really tight fit with CR PETG filament, unable to get the print to screw enough to restrict hose. I wonder if decreasing the screw diameter by 1-3% would be enough to get an easier screw mate. Sounds like other have already expressed the same idea.

The designer has replied