gfunkz

cover

IMG_4175.jpeg

IMG_4177.jpeg

tt.png

ToyotaTundraTrashCan.jpg

plate_1.png

2025-02-12_a9b9bdb6e2fae.jpeg

0.2mm layer, 2 walls, 15% infill

For use with mat

ovationplayer

PXL_20260402_012657989.jpg

PXL_20260402_012642351.jpg

PXL_20260402_012726142.jpg

Fusion Picture.jpg

Slicer Photo.jpg

Inspired by the original design, I created a new model in Fusion with a few updates. <ul><li>Bottom is sized to sit inside the existing rubber mat edges</li><li>No sharp corners or edges. Corners match console/mat curvature. Top edge has a slight round-over.</li><li>Because the mat forces the bottom away from the wall, I increased the angle of the front panel to close up the gap at the top</li><li>Reduced the height so that the bin sits more flush with the console edge at the drink holders</li><li>Pictures are shown in a 2022 Tundra SR5. Given how close the original model fit in my 2022, I assume this will fit newer models as well</li></ul>

Trash can for the center console of the 2025 Toyota Tundra. I am not sure if it will fit earlier models&nbsp;Dimensions:This design is tapered to fit the taper of the compartment. The dimensions will be labeled with top and bottom to clarify which dimension they are.&nbsp;Length front to back (bottom) - 56mmLength front to back (top) - 69.172mmWidth left to right (bottom) - 171.6mmWidth left to right (top) - 197.94mmHeigh - 105.8&nbsp;No supports needed.&nbsp;

2025 Toyota Tundra center console trash can

ASIA

Print Profile(2)

Description

Comment & Rating (26)

License

Related Models