Plier holder/organizer - Free 3D Print Model

Search models, users, collections, and posts

Timbers09

Tools>Organizers

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

1.7 h

1 plate

4.7(33)

Open in Bambu Studio

Boost

206

678

441

318

Released

Description

Thank you all for your input on this Test model:

Feel free to print this if you like, the finalized model can be found here :

https://makerworld.com/en/models/1655098-modular-plier-holder-stronger-redesigned#profileId-1750346

The finalized model features a slightly smaller gap to hold the pliers better, magnet pockets and thicker spacers for additional strength

TEST MODEL INFO:

Hey! this is my very first upload so please bear with me and try it out!

I designed this plier rack based on some inspiration from other branded ones out there such as Snap-on/Sealey/MAC and Milwaukee's versions but didn't want to pay £30-60 for them!

My version can fit most brands of pliers and grips. Please let me know if you need any adjustments and i will upload an alternate print profile.

They are strong enough to hold your pliers/grips in place, the weight of the tools holds them securely in the draw and the height of them is only 45mm allowing to fit in almost any toolbox draws bar the crazy shallow ones.

If any adjustments are required, post a comment and i will upload an additional print profile to suit but i do think i have found a happy medium!

Recommend printing in PLA+,PETG or ABS.

I have these printed in PLA during my testing and there a little too flimsy for my liking. Currently using them daily printed in both ABS and PLA+

USE SUPPORTS, i recommend tree supports as per the print profile and also a brim which can be a small pain to remove but for me on my A1 Mini helps stability of the thin legs when printing ABS, i did not require the brim for PLA/PLA+/PETG

Benefits:

CHEAP
Mega toolbox/draw space saving
DID I SAY CHEAP?
Organization
Modular (I use 4 in a row in my Snap On toolbox draws)

PLEASE NOTE: THIS IS A TEST MODEL TO GET FEEDBACK FOR THE FINAL DESIGN

Boost Me (for free)

Please boooooooooost, don't worry if not. Enjoy the model :)

Comment & Rating (42)

@DOOMaker719

Print Profile

0.2mm layer, 3 walls, 10% infill

mine printed poorly but it was the filament not the print profile

The profile uploader has replied

@Timbers09

hey! I apreciate the review :) a few others have mentioned stength is a bit weak but usable, would you agree? or recomend I upload the strengthened profile ? thanks again :)

@DOOMaker719

Replying to @Timbers09 :

Mine was truly a filament issue. Not the design. And even with that it still hasn't broken

@Timbers09

Replying to @DOOMaker719 :

no problem, good to know! if you did ever decide to want/need the finalized print (stronger etc) there s a link to the maker world profile in the description of this one which I have now dubbed the ‘test’ model after seeing everyone’s feedback :)

@Cutis

Print Profile

0.2mm layer, 3 walls, 10% infill

Thanks 🖖

The profile uploader has replied

@Timbers09

Glad you're happy and they printed well! what filament did you use ?:)

@Cutis

Replying to @Timbers09 :

Sunlu PETG

@Lintz

Print Profile

0.2mm layer, 3 walls, 10% infill

A bit wobbly, and extensions pieces are hard to put in. Might be my print settings. very good otherwise

(Edited)

The profile uploader has replied

@Timbers09

hey! thank you for the review :) I do have a slightly thicker version but reduces the space for your tools by 1mm, I can upload this print profile if you would like ? it adds a fair bit of strength :) as for the little joining bits, I did design them to be super tight. I can always do you a special with slightly more tolerance if required. please, let me know :)

@Lintz

Replying to @Timbers09 :

Hi Timbers, thank you. The version i printed is fine for me, i don't think i will need the added strength personally, but someone might. Thanks for the model - cheers :)

@user_2941049737

Print Profile

0.2mm layer, 3 walls, 10% infill

Great print. It will free up a lot of space in my too box.

The profile uploader has replied

@Timbers09

hey! if you enjoyed this model be sure to check out the finalised one :) p.s - thanks for your positive rating!

@EpicEcho

Print Profile

0.2mm layer, 3 walls, 10% infill

works

@user_4027952922

Print Profile

0.2mm layer, 3 walls, 10% infill

works very well

@LoganC1212

Print Profile

0.2mm layer, 3 walls, 10% infill

works perfectly. it's strong when you put a few together

@user_1084249892

Print Profile

0.2mm layer, 3 walls, 10% infill

Other Issues:crappy

The profile uploader has replied

@Timbers09

oh no, I’m sorry you had issues. what was your issues with this test print?

@user_3645977153

Print Profile

0.2mm layer, 3 walls, 10% infill

@Daddy2

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.