It's a me

cover

Screenshot 2023-12-28 213615_778985c2-62ae-48fe-9982-a191b8dc849f.png

Screenshot 2023-12-28 213604_cac7da48-fd10-45e3-b331-11e1d57e9b42.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

Screenshot 2023-12-27 104657_ab331dc9-f854-4934-8cb6-80c8e41a6996.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_4.webp

plate_5.webp

0.2mm layer, 3 walls, 15% infill

Eric

PXL_20241203_211428120.jpg

PXL_20241203_211450557.jpg

Half Sized - 0.12mm layer

plate_6.png

o.0jack

104966_0_f0c742c0-980b-4dfa-8c7d-be6488393dda.webp

104967_0_8a444dde-b4ba-437b-9430-38b29749aba9.webp

104965_0_54677e2a-c178-444f-9bc0-91ac91b5efff.webp

0.2mm layer, 3 walls, 12% infill

plate_7.png

tempImageGLkJW9.jpg

tempImagef5PyzU.jpg

EB5127B9-DA6F-4318-93D0-3DD32B251308_1_201_a.jpeg

· Scaled to 90%.· 10% infill on large pieces (&#34;Gyroid&#34;)· Savings of 120g of filament.· Yoshi&#39;s total height of 21.5cm (original approx 25cm).. The eyes are reoriented on the printing bed to improve aesthetics, so that the visible part of the piece is smooth and fine (it looks great on Pla Silk). I have reviewed the upper edges of the two parts with very fine sandpaper to leave them with a better finish.

Scaled to 90% & modified eye position on the impression bed

plate_8.png

plate_9.png

jmk7311

WhatsApp Bild 2025-09-13 um 14.38.18_a096d419.jpg

WhatsApp Bild 2025-09-13 um 14.38.18_56609a26.jpg

WhatsApp Bild 2025-09-13 um 14.38.18_f8d0dd32.jpg

This print profile is customized for the Yoshi model by MrGnarly. Thank you really much for your awesome model. The model has been scaled up to 200%, since the original size felt too small.<ul><li>Walls: 2</li><li>Infill: 10% Gyroid (light but stable)</li><li>Supports: Tree support, only where needed</li><li>Material: PLA recommended</li></ul>Colors used:<ul><li>Green (body)</li><li>White (eyes, belly)</li><li>Black (eyes)</li><li>Red (spikes/saddle)</li><li>Orange &amp; Yellow (shoes, true to the original Yoshi design)<ul><li>Note: MrGnarly used brown for the shoes, but the authentic look is orange &amp; yellow.</li></ul></li></ul>Recommended settings:<ul><li>Nozzle temp: 200–210 °C</li><li>Bed temp: 60 °C</li><li>Layer height: 0.2 mm (balanced detail &amp; print time)</li></ul>With this setup, you’ll get a clean and stable print, with colors closer to the original Nintendo Yoshi.

Multicolor Yoshi (200%) – Optimized Print Profile

maggoh

322485aa-aede-4741-8670-dcbbb2af56d4.JPG

Converse Shoes for Yoshi<ul><li>0.16mm layer</li><li>2 walls</li><li>15% infill</li></ul>

Converse Shoes - 0.16mm layer, 2 walls, 15% infill

BRaVO503

20251215_225526.jpg

20251215_222056.jpg

20251215_225521.jpg

Prints all the pieces to make yoshi in just under 3 hours.&nbsp;In order to do 5 colors with one ams choose black for the boots then when they pupils are done printing swap your black for brown.&nbsp;Half sized, and eyes are printed vertically for better quality

[ONE PLATE] half sized (121mm tall) 3 HOURS

eSun PLA+ HS Peak Green

Sunlu PLA+ 2.0 weiß

Sunlu PLA+ 2.0 Sunny Orange

Sunlu PLA Matte HS Cherry

Sunlu PLA+ 2.0 schwarz

Sunlu PLA+ 2.0 Vivid Yellow

TheOneWhoKillUs

IMG_6471.jpg

IMG_6472.jpg

IMG_6473.jpg

IMG_6474.jpg

Hier ein überarbeitetes Profil speziell für die H2-Serie!&nbsp;Die Druckausrichtung für die Augen wurde verbessert/geändert, sowie der Druck nach Objekt aktiviert (bei den meisten Platten). So wird die Gesamtqualität einzelner Objekte verbessert, die vorher fehlgeschlagen sind. Ebenso musste der Wandgeneratortyp für die weißen Objekte von “Arachne” zu “klassisch” geändert werden, da sonst Probleme an diversen Ecken auftreten.&nbsp;Gedruckt mit folgendem Filament:&nbsp;<ul><li>eSun PLA+ HS Peak Green → der beste Grünton, der meiner Meinung nach zu 95% an original Yoshi heran kommt, alle anderen Filamente aus den Bewertungen sind entweder zu hell oder zu dunkel</li><li>Sunlu PLA+ 2.0 weiß</li><li>Sunlu PLA+ 2.0 schwarz</li><li>Sunlu PLA+ 2.0 Sunny Orange</li><li>Sunlu PLA+ 2.0 Vivid Yellow</li><li>Sunlu PLA Matte HS Cherry Red</li></ul>Beachtet, dass Makerworld keinen Upload mit benutzerdefinierten Filamentprofilen erlaubt, weshalb außer beim eSun PLA+ die Filamentprofile auf Bambu PLA Basic eingestellt sind. Diese funktionieren bei den meisten Druckern uneingeschränkt mit Sunlu Filamenten. Andernfalls teile ich gerne meine Filamenteinstellungen mit. Bitte achtet ebenfalls darauf, die Filamente entsprechend zu kalibrieren (Flussdynamik und Flussrate). Andernfalls kann keine Garantie für Passgenauigkeit und Druckqualität gegeben werden. Die fantastische Qualität kann anhand meiner Fotos nachvollzogen werden :)&nbsp;Druckeinstellungen:&nbsp;<ul><li>0.12mm Schichthöhe für mehr Details</li><li>10% Gyroid Infill</li><li>3 Wandlinien</li><li>alles andere wie beim Designer</li></ul>Viel Spaß! :)

Here is a revised profile especially for the H2 series!&nbsp;The print orientation for the eyes has been improved/changed, and print by object has been activated (for most plates). This improves the overall quality of individual objects that previously failed. Also, the wall generator type for the white objects had to be changed from “Arachne” to “classic” to avoid problems at various corners.&nbsp;Printed with the following filament:&nbsp;<ul><li>eSun PLA+ HS Peak Green → the best shade of green that, in my opinion, comes 95% close to the original Yoshi, all other filaments from the reviews are either too light or too dark</li><li>Sunlu PLA+ 2.0 White</li><li>Sunlu PLA+ 2.0 Black</li><li>Sunlu PLA+ 2.0 Sunny Orange</li><li>Sunlu PLA+ 2.0 Vivid Yellow</li><li>Sunlu PLA Matte HS Cherry Red</li></ul>Note that MakerWorld does not allow uploads with custom filament profiles, which is why, except for eSun PLA+, the filament profiles are set to Bambu PLA Basic. These work without restrictions on most printers with Sunlu filaments. Otherwise, I'd be happy to share my filament settings. Please also make sure to calibrate the filaments accordingly (flow dynamics and flow rate). Otherwise, no guarantee can be given for fit accuracy and print quality. The fantastic quality can be seen from my photos :)&nbsp;Print settings:&nbsp;<ul><li>0.12mm layer height for more details</li><li>10% Gyroid Infill</li><li>3 wall lines</li><li>everything else as per designer</li></ul>Have fun! :)

H2 Profile - 0.12mm - Customized Settings

Jzap

Captura de pantalla 2026-04-05 a la(s) 8.21.24 p. m..png

Captura de pantalla 2026-04-05 a la(s) 8.21.27 p. m..png

Fast print, 2 plate design, with print in object mode, 5 colors, 1 plate with green, second plate with 4 colors. 5 and a half hours print.supports ON.&nbsp;&nbsp;

0.12mm layer, 2 walls, 15% infill

Bradwyatt83

yoshi.jpg

0.6mm nozzle, 0.3mm layer, 3 walls, 5% infill

Yoshi from Mario games - Multi-color

Remix includes updated model fixes for easier printing and consistency.&nbsp;All credit goes to the author below&nbsp;<a target="_blank" href="https://www.thingiverse.com/thing:2846113" rel="nofollow noopener">Yoshi from Mario games - Multi-color by bpitanga - Thingiverse</a>&nbsp;

Print Profile(10)

Description

Comment & Rating (1475)

This remix is based on

License

Remixes (3)

Related Models

Yoshi from Super Mario