Impossible Self-Passthrough Fidgets: Tall shapes
Print Profile(1)
Description
A couple of taller shapes in my self-passthrough series.
Each one consists of 2 identical parts that pass through one another!
Fully compatible with the rest of my self-passthrough series: https://makerworld.com/en/collections/4710026
They're exactly twice the height of the cone, and 3 times the size of the cube, so they work really well together :)
These obviously take a bit longer to print than the small ones, but they're really satisfying to fidget with.
Print-in-place is great here, because the two parts support each other as they get taller.
I had no problems separating them: If they stick, it's likely right at the base, so they're easy to detach.
Note that if you're on an A1/A1 mini (or another bed-slinger), the one with the thin base might be at risk of toppling over. The print profile includes a brim, but you might want to lower the print speed to be safe.
Boost Me (for free)
Boost if you want me to make more! 🚀
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (18)