Winged Heart
Print Profile(1)
Description
Welcome to my designs,
An image of a winged heart printed in 4 colors.
The image can be scaled arbitrarily; however, ensure that the Z-height remains unchanged.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Basic Gray Transmission Distance: 2
PolyLite PLA White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #19 (1.6mm) swap to Gray
At layer #29 (2.4mm) swap to White for the rest.
Feel free to check out my other designs as well:
Candle Holders
Lamps
Figures, Busts & Decor
Cups and Goblets
Practical Prints
If you have any questions, suggestions, or ideas for changes, please leave me a comment.
I design in my private time and for my own enjoyment, and I appreciate any recognition even more.
I don't have a large community, so I would be happy if you leave me a like or follow me on Instagram.
I would also be very happy about a Boost:
Boost Me (for free)
This helps me cover the costs of experiments and filament and helps me continue to offer and design special designs and helpful print data. I would be very happy if you support my work. It costs you nothing, and it helps me a lot.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)