Graffiti Avatar Korra Hueforge
Print Profile(2)
Description
Please leave a rating or comment if you like the print!
Want to sell my prints? Commercial License now available here: https://patreon.com/3ReePrinting
Check out the rest of my Hero/Villain series here: https://makerworld.com/@3ReePrinting/collections/3340968
“Still think I'm a half-baked Avatar?”
Patreon request!
This print is the maximum build plate size for an A1 Mini, but it should work on any printer.
Boost Me (for free)
Thank you for the support!
If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLabs Basic Turquoise Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #13 (1.12mm) swap to Turquoise
At layer #20 (1.68mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)