Monitor Riser Legs for Wood Shelf (9.75" W x 3" H) - Free 3D Print Model

Search models, users, collections, and posts

Part Time Printer

Household>Decor

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

1 plate

4.8(4)

0.2mm layer, 4 walls, 25% infill

6.8 h

1 plate

Flat Base (+ shorter version)

12.6 h

2 plates

Open in Bambu Studio

Boost

117

122

Released

Description

Hi everyone, if you want to see the video I made for this print, it is linked here. Essentially, these legs are designed to be drilled into a basic wooden shelf to act as a leg for a monitor riser / stand.

These monitor riser legs were designed in Fusion360 and can fit standard wood shelving planks. The wood plank that I used was a basic, finished plank from Lowe's. The link for that shelf is here: https://www.lowes.com/pd/Homenations-10X24-DARK-BROWN-D-COR-BOARD/5015586395

The max size these legs can fit is roughly 10 inches. The height of the riser is roughly 3 inches. The wood screws I used were M4 wood screws with a max length of an inch (or you risk protruding out the top side of the shelf if the length is any longer).

If you want a size that can fit a longer piece of wood, let me know! 10 inches was optimal for my desk at the time.

Comment & Rating (5)

@Devon_Winfield

Print Profile

0.2mm layer, 2 walls, 15% infill

love how these turned out used them on a shelf piece I found at Homedepot for 10 bucks and turned out incredible. beautiful design well done!

@user_287890238

originally made this to actually put my monitor stand on it, which I did at one point and it was very stable even without screwing it in. But I ended up getting a monitor arm so now this shelf is for aesthetics and it looks great! followed the creators recs on a shelf from Lowe's and one inch screws and it worked perfectly! oh I did use the build with the flat bottoms and added felt too

@mogli

Print Profile

0.2mm layer, 2 walls, 15% infill

I love the simple design. This printed out great. My one problem with it is how the base is completely round. I printed this to hold a 10kg monitor and I didn't want all that weight to rest on a single point of the curve. I cut a small part of the base to make it flat so the weight is distributed over an area rather than a line. I uploaded my print profile with this change.

@Hrv_Tagz

Print Profile

0.2mm layer, 2 walls, 15% infill

@OvidiuCG1

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.