Red Owl (Claw Knife) NO AMS - Free 3D Print Model

Search models, users, collections, and posts

箱庭猫猫

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

4.2 h

3 plates

3.9(23)

Open in Bambu Studio

Boost

663

1161

902

292

Released

Description

Content has been automatically translated.

Show original

Red Owl series claw knife from Delta.

The blade features exquisite carvings throughout, providing a comfortable grip. (Considerable tolerance is provided to account for significant differences in printer tolerances).

Boost Me (for free)

Note: Please clean the build plate to ensure it is clean (if necessary, use build plate adhesive to increase adhesion).

The blade includes auxiliary support blocks to reduce blade print wobble, which can be removed after printing with a small knife.

If you are confident in your printing skills, you can delete the intermediate auxiliary linking blocks.

Comment & Rating (26)

@stoes11

Print Profile

0.2mm layer, 3 walls, 10% infill

I really really like the design of the knife !! However i did not realize i'd have to glue everything together. I thought the handle would keep everything together nicely but the cuts are at the same place creating a pretty big weakspot. Also the studs are all different heights but theres no instruction on which one goes into which hole i had to try see what would fit best before doing it all again for glueing. Print quality was good tho and no supports needed. thank you!

@soares3d

Print Profile

0.2mm layer, 3 walls, 10% infill

Excellent model, beautiful design I attempted printing three times without supports, however, success only came after enabling supports It's not very sturdy because the blade is glued to the handle, perhaps some adjustments to make it more robust would make the model perfect Thank you for sharing

Show original

@Hef413

Print Profile

0.2mm layer, 3 walls, 10% infill

The design is so so. Requires a lot of glue and the seam of the center blade is so close to the seam of the outer handle, so it is difficult to glue together well.

@user_2987717061

So you designed a knife that is broken? I would probably remove this design from Maker World and put it on Broken World

@user_2470751057

is it dull

@canialon

Print Profile

0.2mm layer, 3 walls, 10% infill

printed for my younger siblings, they love it!

@DrakeDon

Print Profile

0.2mm layer, 3 walls, 10% infill

clogged my printer

@LucLucario

Print Profile

0.2mm layer, 3 walls, 10% infill

I find it weird to have to glue the Parts instead of the handle being done in a way to hold them without needing glue.

@user_3784187362

Nothing works, it's nonsense

Show original

@user_3654573844

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.