_hApPyLiL_aCCiDenTs

cover

Adapter 3.jpg

Adapter 4.jpg

Adapter 2.jpg

Adapter 1.jpg

plate_1.png

2025-02-12_8228fc02b08db.jpg

0.2mm layer, 2 walls, 15% infill

JWalker76

shared image (9).jfif

<p>I created this to allow for the hands to be extended. My son loves it like this. Inspiration came from the connectors posted by this designer. I created my design in Solidworks. I used 4 walls, 25% infill and printed laying down to prevent the layers from allowing an easy to break part due to the length. I found that printing the blaster as a single part versus split and glued works better, the mounting hole for the connector rods is stronger when it is printed as a single part. Enjoy</p>

0.2mm layer, 4 walls, 25% infill

<p>A simple adapter/connector for the poppy play time shooter and grab pack hand. Tolerances are tight so there is no glue necessary allows the grab pack hand to be removed for interactive play. The adapter/connector should essentially snap into the grab pack shooter but allow the grab pack hand to be attached and removed. I&#39;ve only used the default 0.20 mm Standard and PLA Basic for the 3D print with zero issues.</p>

Connector for grab pack shooter and grab pack hand

user_2593305920

224.jpg

Stupid stuff rhdhdhhdjdj

ASIA

Print Profile(2)

Description

Comment & Rating (71)

License

Remixes (1)

Related Models