Hokuto No Ken Hueforge

Project: Ken le survivant.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 235x235mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA Francofil Bleu 5002 Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 5.5
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Bleu 5002
    At layer #11 (0.96mm) swap to Jade White
    At layer #12 (1.04mm) swap to Red
    At layer #17 (1.44mm) swap to Yellow
    At layer #18 (1.52mm) swap to Jade White
    At layer #21 (1.76mm) swap to Yellow
    At layer #23 (1.92mm) swap to Jade White for the rest.
 

Comment imprimer plus de 4 couleurs avec un seul AMS: à partir de 42sec sur la vidéo

How to print more than 4 colours with a single AMS: from 42 sec onwards in the video