card deck · print in place box
Print Profile(2)
Bill of Materials
Description
card deck · print in place box
modern minimalist card deck box with print in place hinge and magnetic lid
dimensions in mm:
- inner size ~ x:99 · y:70 · z:20
You'll need 2 4x2mm magnets, as well as some drops of super glue to ensure they really stay in their position and don't get pulled away from the slot.
update · 2025-07-30 · added a version with 25mm height capacity (print profile and stl)
important · make sure that:
- your filament is dry and calibrated so that it deals appropriately with the tolerances
- your build plate is properly clean so that there aren't adhesions issues and lifts during the print · if you usually experience issues with bed adhesion on your prints, enable a 5mm brim on the slicer
- please make sure that you are very mindful of the polarities of the magnets when assembling and gluing in their spots as you want to make sure that each section attracts and not repels the one that will sit above/below
- there can be a colour change, with the speed changes that happen on the lid once the bottom has been printed. I actually enjoy the result, but for those who do not like it, you'll need to adjust the speeds (i.e slow down the entire print to have a steady / constant speed on the outer walls)
photos show printed in pla-cf and matte pla
- .40mm nozzle
- .16 layer height
- 10% gyroid infill
notes
- includes bambu studio 3mf files and STLs
- all photos uploaded are of the actual printed model, and are copyright protected
- if you enjoy this model please consider to buy me a coffee
- commercial licence membership available on my patreon
Membership
commercial license now also available through makerworld
Boost Me (for free)
if you enjoy the design, please consider giving it a boost :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (162)