Shrek Beware Ogre Magnet (8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI)

Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). I used the paintbrush to manually add the highlights, as well as coloring half the lettering with a darker red.

8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

Hope you enjoy!