Yorkshire Terrier - Hueforge

Yorkshire terrier dog hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

Filaments Used:
    PLA Kingroon Black Transmission Distance: 0.1
    PLA Sunlu Chocolate Transmission Distance: 4.5
    PLA Kingroon white Transmission Distance: 5.4
    PLA Kingroon red Transmission Distance: 5.6
    PLA kingroon yellow Transmission Distance: 5.8
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Chocolate
    At layer #18 (1.52mm) swap to white
    At layer #20 (1.68mm) swap to red
    At layer #22 (1.84mm) swap to white
    At layer #23 (1.92mm) swap to yellow
    At layer #25 (2.08mm) swap to red
    At layer #26 (2.16mm) swap to white for the rest.