Search models, users, collections, and posts
Print Profile(2)
0.28mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
Single part, no Support - print 4x
Designer
51 min
1 plate
Open in Bambu Studio
Boost
174
599
73
28
631
302
Released
Description
for this tower: https://makerworld.com/de/models/640229#profileId-566060
I found these supports for a hydroponic tower (https://www.printables.com/model/807102-4-way-plant-support-for-modular-hydroponics-tower).
I added some clips to connect the supports, allowing them to be printed in one run. They are intended for use with the 4Pot parts of the hydroponic tower.
The clips must be mounted using pliers—I designed them to be very tight and secure to provide stability. Also, install them upside down and in reverse (see the images).
and kindly consider using a cutter-blade to separate parts from supports
Support is activated, with PLA-Interface:
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (73)