Search models, users, collections, and posts
Minecraft Wither Boss Articulated
IP Report
Print Profile(2)
Wither Boss 200% Scale Default
Designer
3.9 h
3 plates
0.2mm layer, 4 walls, 100% infill
3.5 h
1 plate
Open in Bambu Studio
Boost
454
1029
87
39
1 k
679
Released
Description
- Minecraft Wither Boss Articulated
- Vanilla Ratio
- Multicolor
- Scalable
- Head can be printed whatever orientation you want
- Easy to snap heads, heads print separately from body, use rubber hammer
- No supports, No Glue, No Brims, No overhangs
- Keychain hole
How to build:
1. Put on protective gloves
2. Take any head in one hand, model in the second
3. Rotate head and push with force toward the appropriate head socket
4. Keep screwing on a couple of times, to engage part
5. After initial attach (you can see small plastic dust - don't worry) put it on flat surface (like floor or anvil)
6. Check that the model's opposite side rests perpendicularly on the surface
5. Keep the model by one hand and take dumbbell in another and just slightly hit the head, it will click and stay forever on the socket.
Now this head rotates easily and holds securely.
6. Repeat 2 other heads same way
7. Voila - it's all built
Enjoy!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (87)