Frenklin von Toluene

cover

photo_4_2025-02-10_17-30-56.jpg

photo_5_2025-02-10_17-30-56.jpg

photo_6_2025-02-10_17-30-56.jpg

photo_8_2025-02-10_17-30-56.jpg

plate_1.png

100% scale, no AMS, a1 mini and other printers

2025-02-10_0d2cd9f98a9668.jpg

100 % scale, ams, a1mini and other printers

3D Prince

94529f2a-8ad2-466d-adee-99bf1c8a7b85.jpg

1113e046-c150-4056-9bf0-0cd7074755d9.jpg

017e717c-0f3d-4450-a0ad-f57e73482754.jpg

Adaptive layer height carefully tuned for bottom smoothness. this allows supports to be turned off model joints split and rejoined in pairs then each joint individually height range modified to allow for the tops to print strong with infill.   many many substantial value adding adjustments also that result in low filament material waist and quick print time with reasonably good strength…&nbsp;see the specifics below…&nbsp;0.20mm layer, 1 walls, 1mm wall width, 0% infill, wall generator arachne, detect over hang walls off, detect narrow internal solid infill off, ensure vertical shell thickness disabled, acceleration speed [ short travel , initial layer travel, initial layer, outer wall, top surface ] all turned up to 10000mms. max volumetric speed for PLA, and PETG both set to 30mm3/s, cooling for over hangs set to 100%, minimum fan for layers less than 4 seconds 100% and for the other layer times 100% and auxiliary part cooling fan 70%. note that filament flow, and cooling settings will likely revert to default and acceleration speed will also likely revert to default if you use a different Bambu printer.&nbsp;

Adaptive Layer Height Carefully Tuned for Bottom Smoothness.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Pretty pls🥺👉🏽👈🏽</boostcontent></boostme>Description&nbsp;I&#39;m happy to share this design of Cute Articulated Seal. There are multiple version available with different sizes and either with AMS or single colour. I hope you will enjoy it and happy printing!&nbsp;If you like this model don&#39;t forget to checkout some my other designs <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/@FrenkVonToluene/collections/4911427">here</a>

Cute Articulated (Flexi) Seal

ASIA

Print Profile(3)

Description

Comment & Rating (314)

License

Related Models