Adorable Panda Cub Keychain

Adorable Panda Cub Keychain

• A meticulously crafted, multi-color printed panda cub in a charming prone position

• Three print configurations are provided, along with corresponding monochrome options for easy custom painting. These are:

  ①A miniature keychain version (compatible with MA001 keychain), initial configuration outer dimensions 48.8X49.2X27.6mm

  ②A full-size pendant version (compatible with MF001 nylon cord), initial configuration outer dimensions 61.1X61.4X34.5mm

  ③A full-size display version

• 0.2mm layer height yields excellent results. A 100% print speed is recommended

• If overhang quality is unsatisfactory, ensure adequate cooling! Calibrate flow rate and ensure filament dryness!
• For any questions, please comment below, and I will promptly address them

3D Printing Tips and Preparation Notes

(Most creator-published models are tested for compatibility across all printer models. Print issues often stem from printer or filament malfunctions. Troubleshooting is a key 3D printing skill. Engage in discussions within the comments section—it's the essence of community building.)

I've detailed some precautions below. For further assistance, contact customer support or consult the Bambu Wiki—a wealth of knowledge awaits.Print Quality and Troubleshooting | Bambu Lab Wiki

• Ensure the build plate is clean; regular cleaning is recommended! Oil residue from hand contact significantly reduces adhesion. Similarly, previous print debris or minute remnants affect first-layer quality, reducing yield.
• Dry your filament; this significantly impacts print quality and experience! Prolonged storage makes filament susceptible to moisture. If stringing occurs, consult the manufacturer for drying parameters. Most filaments aren't dried before packaging; thus, newly opened spools may be slightly damp, necessitating pre-printing drying.
• When using a new filament brand, perform filament flow calibration immediately and adjust calibration coefficients. This greatly enhances print quality and is crucial for integrating the new filament with your printer.
• If print quality suddenly deteriorates or yields decrease, check for nozzle clogging and recalibrate your printer if necessary.
• Print at the recommended speed specified in the model instructions. Overhang quality is directly related to print speed. Appropriate speed (neither too fast nor too slow) provides sufficient cooling time during deposition.
• Set appropriate bed and nozzle temperatures for each material. Extreme temperatures can cause warping, layer defects, or adhesion problems, affecting print quality and success rate.