Robot E (Tiny, 20 joints, Print-In-Place)
Print Profile(6)
Description
Boost Me (for free)
If you like this design, your support would be highly appreciated.
Hi, this time I brought a new design, the robot E. This is a brand - new challenge. I tried to make it as small as possible. It has 20 movable joints and is also print-in-place. Of course, if you want to print this extremely small robot E, a 0.2mm nozzle is required. I've also prepared a version that can be printed with a 0.4mm nozzle. Please pay attention to the instructions in the profile.
During the printing test of this tiny structure, I found that different printers or filament can lead to different results. To help more people print it successfully, I had to increase the gaps between the joints. In the version for the 0.4mm nozzle, I also adjusted the joint gap separately.If the joints cannot move, you can try enlarging the model a bit.
For other models of robots, you can click the link to find them:
You can use the AMS to achieve various personalized color combinations.
Tips:
When printing the 0.2mm version, please make sure to add a raft and do not set the printing speed too fast.
No additional support is required for printing. After printing, you can remove two parts in the order of 1 and 2 in the following picture.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1077)