Bayer 04 Leverkusen wall clock

I created a Bayer 04 Leverkusen wall clock. The diameter of the clock is 242mm and the heigth is 24mm. You need ca. 200 gram of filament.

I printed it with Orcaslicer and i recommend to set the first layer flow to 105 - 110%. Use Hilbert curve.

When you download only the step part, seperate the part an choose your color.

Then turn it down to the build plate. Because of the size of the clock, disable automatic flow calibration.

I used this clockworks https://www.amazon.de/Mechanismus-Verschiedene-Uhrzeiger-Batteriebetriebene-Ersatzteile/dp/B08V5RQ93S/ref=sr_1_2?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3TWEC6CYT1JSP&dib=eyJ2IjoiMSJ9.F40GhXaqDImggr-V56sPjXiESQtBeNddfdTVRbVezKocJGFBhUrQbBOPDIoSK6WNPzMykzuzK1vIohJFxt_fqfSjEUaNyAzN6zOOH0UTuUrTyJJVKR4R-2G82qk7YSG50K3LHX-mwzPLOTQ2y9iU7v1IbUt2rx7qnqoKcpSJBMeqn-EipByGVtHBoZx1GAuDDxsoxspHt9V5Mcc5h9mulFQdRMUKZnnWpL5NxQmDAVIRNPzD2yu_O5zLbN89SPA4yfczaFYhAVilnLdDKK44-q51zaRVmtR50BDc__yTk5A.Wwo0N10q_5ZSYSlL_w_UWpHyD9PbmeGpwsOlbM4BBgM&dib_tag=se&keywords=outus%2B6%2Bst%C3%BCck%2Bquarz%2B13mm&nsdOptOutParam=true&qid=1734466003&sprefix=outus%2B6%2Bst%C3%BCck%2Bquarz%2B13mm%2Caps%2C101&sr=8-2&th=1

But it will also work with similar clockworks with the same dimensions. Important is the thread length of the clockwork. It should be 6mm long.

Tell me which clock i should create next.

More clocks will follow