DnD Monster Tracking Rings with Bloodied Condition

This is a set of 20 tracking rings (10 medium, 10 large) designed for easy monster identification during DnD encounters.

There are 10 medium sized rings labelled ‘A’ to ‘J’, and 10 large sized rings labelled ‘K’ to ‘T’. We found identifying enemies / monsters helps keep track of damage whilst DM-ing and I've used letters over numbers specifically so it matches the encounters section in the DnD Beyond app.

Update 14/10/25 - 2 new profiles added:

• Numbered rings (1–10 for Medium and 1–10 for Large)
• Two print profiles:
  • 0.2 mm nozzle — recommended for best legibility of text/numbers
  • 0.4 mm nozzle — optional, though results will vary so please use 0.2mm profile if you are able

Each ring is double-sided: one side is black (normal status), and the other side is red to indicate the monster is "bloodied."

• Medium rings fit 25mm (metric) and 1-inch (imperial) figures.
• Large rings fit 52mm (metric) and 2-inch (imperial) miniatures.

The medium sized rings fit both metric (25mm) and imperial (1 inch) figures, similarly, the large rings fit metric (52mm) and imperial (2 inch) miniatures as well.

I’ve also designed a convenient storage unit with a magnetic lid (6mm diameter by 2mm deep magnets), making it easy to access and store during play. You can press-fit the magnets or glue them for extra security.

Printing Tips:

*I have added a 0.4mm nozzle version which has all parts on one plate, still recommend 0.2mm however, especially for the bottom layer text clarity but another user has had success with a 0.4mm print (see comments).*

• For clear small text, I recommend using a 0.2mm nozzle, though a 0.4mm nozzle is also an option (results may vary)
• For the holder, a 0.4mm nozzle with 0.14mm layer height works well
• Consider using concentric patterns for the rings’ top and bottom surfaces for a cleaner look (not good for the holder lid)

I've added ‘single-sided’ version of the rings as well if you did not want to track bloodied status as a remix. Let me know if you want just a ‘medium’ sized version as I can upload that too at some point.