Articulated Crystal Dragon - Free 3D Print Model

Search models, users, collections, and posts

Maty505

Art>Sculptures

IP Report

Print Profile(4)

All

A1 mini

H2D

P1S

X1 Carbon

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

3-Color Dragon – Color Change by Layer, Minimal Waste

3 h

1 plate

4.7(76)

0.16mm layer, 3 walls, 13% infill

3.3 h

1 plate

4.4(143)

15.5" LONG ~ 0.12mm layer, 3 walls, 10% infill

4.5 h

1 plate

4.8(13)

0.2mm layer, 3 walls, 15% infill

2.9 h

1 plate

4.3(303)

Open in Bambu Studio

Boost

2764

5375

1229

377

19.3 k

10.4 k

Released

Description

articulated dragon model. resize for your needs.

Comment & Rating (1229)

@BertC

How did you guys print this dragon? I keep getting slight issues with the part curling during the print and that is whilst using the designers print profile with no other changes being made other than colour... I am printing on an A1 with Bambulab filament

@toriv1976

You should try and adjust your bed and filament temperature settings.

@BertC

Replying to @toriv1976 :

You commented on my rating, Bambulab does not allow me to rate higher than I did due to the fact that the print fails every time. I have changed temps, speeds etc etc to try and prevent the overhangs from curling up. Nothing that I have done works. I understand the point you made on my rating and I have deleted it since but keep in mind the ratings are against the print profiles not the model.

@nicksredline

Replying to @BertC :

have you tried applying any glue to the area it can help hold down lifting issues ( from my personal experience) . and its so cheap for some purple glue stick and now have no issues ( just had issues with dragons on some filaments and increasing bed temp nozzle temp helped some but a gluestick has given me no issues so far (only 25 or so prints in using glue so far i used to be against it )

@patridge

The print profile is no longer public

Looks great as long as you don't try to free it completely from each segment. The head fuses to the second body segment and starts breaking the loop if you try to separate it. [Edit: Tried a second one after rotating the model ~35 degrees, splitting the dragon into objects, moving the head a few tenths of a millimeter, re-assembling the model, then rotating it back to fit the build plat again. This print has a delightfully floppy head.]

(Edited)

@senzubeans

Wish I had read this comment before printing and promptly snapping the head off. Not the best design IMHO.

@eddie77

same I’m new to 3d printing and it just snapped into bits when getting it off plate 😬

@SCM777

This is the first dragon I have printed like this. It printed beautifully with no issues.

The designer has replied

@Maty505

It looks beautiful. This was first dragon i have ever designed, so im glad it s nice.

@WolfWares

Love the filament! Do you mind if I ask what/where this is?

@An3Lab

Print Profile

0.2mm layer, 3 walls, 15% infill

Very cool

@Gekon3D

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice work.

@tdack.

Print Profile

0.2mm layer, 3 walls, 15% infill

FlashForge Obsidian Chameleon PLA and BambuLabs Basic PLA

(Edited)

@Fuey

uhm... that's not the same model

@tdack.

Replying to @Fuey :

You're right! I don't know what happened there, I'm positive I uploaded a photo of this model. I'll see if I still have it.

@adh2013

The print profile is no longer public

Cam out perfect, other dude just doesn't know how to print with Silk PLA.

@Codyinbody3

Boosted

The print profile is no longer public

Great work!

@vici010

That's funny 🤣

Show original

@Nicholas_Chi

Replying to @vici010 :

dam . . . that is a lot of dragons. . . how much filiment did U use?

@JMEads

My son loves it!! the first joint is fused at the head, not sure if it’s supposed to be but I’m scared to try to get it to move & break it wasting 4+ hrs of printing. The last joint was also fused but has since started moving. FYI, the crystal points are VERY sharp!!

@printgeluk

Same happened to me, the first joint will break if you push a little too hard.

@Conchulio

Print Profile

0.2mm layer, 3 walls, 15% infill

The little one is cute and easy to print

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.