Print Profile(2)
Description
Tired of those annoying useless purge strings that are everywhere? Well, start collecting and even printing them! On the one side you can create your own cool purge patterns but you can also point it toward a wall to create awesome and hypnotic patterns! (see picture above)
Assembly Instructions:
1. Grab the main body on both sides and push down onto the base. *Don't push from the top. (it's very tight tolerances so no glue is needed)
2. Run the LEDs around the slot on the inside. (Link to the LEDs is down below.)
3. Place the Center Pattern right behind the holes for the purge strings. (Insert from the back and be sure to push on the edges.)
4. Insert the purge into the holes on the side of the Main Body in any pattern you like.
5. Place the ring in the groove in the front to hold the purge pattern in place.
There will also be a print profile for a plate full of purge. (it may be easier to use purposely printed purge as you can make it stiffer)
https://us.store.bambulab.com/collections/makers-supply/products/ws2812b-rgb-led-strip-light
Boost Me (for free)
Boost if you don't' like purge!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)