Large Hanging Sponge Holder for 19mm (3/4") Faucet

I designed this hanging sponge holder from scratch to hold 2-3 sponges out of the way to dry.  It snaps onto the neck of a ¾" or 19mm faucet.  I couldn't find another that was this size that would hold as many sponges and this was good practice in designing a hex pattern.    Prints with no supports and is only 25 grams.  I printed in PLA and have not had problems with creep over the two months I've been using it.  Please note that the sponge basket itself is lightweight and, therefore a little fragile.  I would suggest applying to the faucet by putting your hand directly behind the part that snaps to the faucet.  Remove by pushing on the two ends that secure the basket.  Let me know what you think!  Give a like or a boost if you've found this useful!  Thanks!