Recticle

cover

porsche.png

plate_1.png

Screenshot 2025-02-13 123310.png

Screenshot 2025-02-13 121320.png

Bed Size

DR3D_Prints

PXL_20250715_230857868.jpg

Scaled just enough to still fit on the A1, mirrored

Multicolor, Bigger, Mirrored

ssf720

image0325252.jpg

Arachne Slicing (Better slicing priority = higher quality)10% CrossHatch Infill (Higher Quality)2 Colors Supported (Red Brake Light)105% Scaling for Maximum Sizing

AMS 2 Colors, Arachne, 105% Scale

3DKikl

1739288269601.jpg

1739288269581.jpg

1739288269591.jpg

PorscheA1 mini version 77% size15% infill 9gPlease rate *****

Porsche A1 mini version 77% scale

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

Haplo5

2025-04-22_5c7177699c30a8.webp

Resized to be somewhere around 917 mm. Sorry, but it&#39;s a bit of a puzzle to put together. You will need glue. I sliced it with Pegs but think its easier to not use them. You can use the image to see where all the pieces go. &nbsp;My picture is the reverse of the print plates, my friend wanted it pointing to the right.

0.2mm layer, 2 walls, 15% infill

done

Done

DOne

Skander Majeri

515132325_1233757494915037_5729977530249818196_n.jpg

Since there&#39;s no big model for the A1 Mini i decided to scale the Model to %300 then cut it into 9 pieces that fit the a1 mini plate, i printed it in PETG and it came out great so i think PLA might look even better. Granted it is a pain to assemble, almost like a puzzle which you&#39;ll need super glue for but it&#39;s very worth the hassle at the end. Hope you like it.

Porsche 911GT3 RS %300 Scale(A1 mini Ready, cut to 9 plates)

3 schichten rot

4 schichten rot

AlexL.

20251202_2227271.jpg

20251008_195919.jpg

0.2mm layer, 2 walls, 10% infill<ul><li>Wall Generator: Arachne </li><li>10% Infill </li><li>Red Brake Light with 3 and 4 layer (choose one)</li><li>max size 105% Scaling </li><li>Red light only see to the left side</li></ul>

Reduce Filament changes times

Feuerbowle

IMG_20260221_152007.jpg

Version for A1 Mini<ul><li>Total width around 400mm</li><li>including rear lights</li></ul>

A1 Mini - 400mm - with Lights - No AMS

Stovr1ng

IMG_7565.jpg

This print profile takes the concept of the popular 9-plate A1 Mini profile and scales it up to the absolute maximum size for full-sized printers. By applying an additional 40% upscale to the 300% model, this profile hits a total scale of 420% relative to the original model. If you print all 9 plates, the final assembled Porsche 911 GT3 RS will be exactly 117 cm (approx. 3.8 feet) long! Key Features &amp; Settings: - Model Thickness: 3mm thick - perfect balance of durability and lightweight hanging capability. - Integrated Taillight - AMS / Color Optimization: The red color accent is optimized to prevent excessive filament purging. It prints in just ONE single layer of red on the taillight, meaning minimal filament swaps and drastically reduced waste! - Non-AMS User Friendly: If you do not own an AMS, you can easily remove the red color accent by using the Fill/Paint tool in Bambu Studio to color it back to black before printing.  Picture with Secretlab chair for reference size.  Perfect for filling up a large blank wall in an office, garage, or bedroom. Huge thanks to Reticle for the beautiful design!

AMS 2 Colors, 420% Scale, 9 plates, low waste, 256x256.

Almenning2

20260623_203834.jpg

H2 series, bigger print

Maanye

Screenshot 2026-07-12 at 4.28.10 PM.png

AMS version for red brake lightOptimized to only have as few color changes as possibleTHIS SAVES FILAMENT

Ams Optimised to save purge filament

Porsche 911 GT3 RS Wall Decoration2.5 mm thick, simple and quick print.

Porsche 911 GT3 RS Wall Art

ER Porsche/911

pcgb20_0589_fine.jpg

porsche 911 gt3rs wall art

Judah Designs

Screenshot 2026-04-21 10.45.00 AM.png

Screenshot 2026-04-21 10.44.29 AM.png

Porsche Gt3 Rs Wall Art

ASIA

Print Profile(11)

Description

Comment & Rating (1665)

License

Remixes (4)

Related Models