Dyson Dragonpern Long and Narrow Nozzle Extension

Dyson nozzle extension "Dyson long and narrow nozzle". “https://makerworld.com/en/models/762275”
The nozzle made by Draconpern was too short to reach the bottom between the front seats and the center console of my Tesla Model Y. So I made an extension glued onto Draconpern's nozzle.

I made a first model printed in PLA positioned vertically. This one broke easily because the contact between each layer is limited to the square of the tube. That is why I then made a 45° print to lengthen the contact surface between the layers. I also used ABS instead of PLA.