CPAP headboard mask holder - Free 3D Print Model

Search models, users, collections, and posts

Kreepa

Tools>Medical Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.5 h

1 plate

4.8(21)

best orientation

3.4 h

1 plate

Open in Bambu Studio

Boost

229

927

513

287

Released

Description

For selling membership

https://buymeacoffee.com/kreepa

CPAP face mask holder for headboard of bed. Fits my MALM bed from ikea, but has a 43mm tolerance with a +/- from there, which is about 1.69 inches for the hanger that goes on headboard. Would be ideal with some double sided tape to keep it from sliding around

Boost Me (for free)

Please consider leaving me a boost! Thanks

Comment & Rating (32)

@Kreepa

Pinned by Designer

I personally use this and I love it. I have fur babies that sleep with me and this keeps the pet hair off the mask and up out of the way when throwing pillows around etc.. Hope you enjoy this as much as me.

@user_1308229341

does a good job keeps everything tidy. a little loose on the headboard. going to print a simple 'u' bracket to fit / fill the gap to make a tight fit

@NinjaDeathMonk

Not to be a negative Nancy, but after you use an AirSense 10 or 11 CPAP, it goes into a cool-down mode. This runs a little bit of air for roughly 15-20 minutes after therapy to dry out the hose and cool the water tank. If you put away the mask like this with the hose attached, you are blocking the airflow and you might retain water in the hose.

The designer has replied

@Kreepa

I don’t use water but good to know for others. this still allows air to pass through

@user_288771077

Pretty clever. : ) Thank you.

@ras0ne

Which mask is that if you don't mind me asking?

The designer has replied

@Kreepa

medium fs20 I believe from resmed

@tinkererscove

Print Profile

0.2mm layer, 2 walls, 15% infill

Quick print that does exactly what was needed. Very happy with this.

@SignsTechGuru

Boosted

Great accessory for my mask!

@user_3198862500

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works wonderfully!

@user_3043734009

Print Profile

0.2mm layer, 2 walls, 15% infill

Good design, but the one challenge with this model is that it protrudes right above your head if you use it on the headbard. This isn't a problem of the design however.

The profile uploader has replied

@Kreepa

yea true, I just slide mine out of the way haha, but I don’t share my bed with anyone else either so it’s ok for now but it sits about center of my headboard! I’m surprised how much I use it. Daily! thank you!

@user_3721583150

I'm registered with Maker World and really wanted to download this mount because I have the exact same mask and Ikea bed, but nothing happens Did I overlook something

The designer has replied

Show original

@Kreepa

if you are using bambu printer then it should work. if you are using another printer, then you need to go on a desktop and download the STL file instead. then upload that file to your printer software. hope this helps

@3D_BenchLab

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Deadpool 3 Movie Helmet Textured

Budwin

46.1 k

17 k

Holder for CPAP mask to hang on bed headboard

AllTho

497

101

CPAP Hose & Mask Holder for Thick Headboards

FjordFoundry

CPAP Mask Hook for Headboard – 5 Sizes

Geoffrey

224