Low Profile Phone Holder and Charger+Standby Mode
Print Profile(2)
Description
Low Profile Phone Holder with cable channel for standby mode. Works vertically and horizontally. Fits cables +/- 3mm in diameter. Built for the standard in-box Apple cable but should work with other cables. Notch allows for swiping from the bottom of the screen.
Printing Instructions:
- Chamfers are designed for a 0.2mm layer height but 0.1 should work. Anything in between may not provide the desired result.
- Use a mouse ear brim to prevent warping.
- Use a modifier to select the upper part of the model - Not the base, the angled part that the phone rests on, to make it solid, providing more strength.
- Use an effects sheet to add a cool and smooth look to the bottom!
- I found faster print speeds result in some bumps on the top of the base so consider slowing printing down at the top.
Assembly:
Route the cable through the path once printing is complete. Use superglue to hold the cable permanently if you wish.
Based on a logitech phone holder I have. Printed in Bambulabs Ash Grey Matte PLA.
Happy printing! Please let me know if you have any feedback for me!
Boost Me (for free)
Give me a boost if you liked this model!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)