Spiderman Hueforge 100x200
Print Profile(1)
Description
Project: Spiderman.hfp
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm
The Model is 100x200mm in size
You may print at higher layer heights below the Min Depth of 0.44mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA Smart Recycled Coral White Transmission Distance: 6.4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.68mm) swap to Red
At layer #7 (1.04mm) swap to Coral White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)