Search models, users, collections, and posts
Housing for the Shelly Plus Series
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
54 min
1 plate
Open in Bambu Studio
Boost
327
1519
49
30
854
574
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
An easy-to-print housing for the Shelly plus 1, Shelly plus 1PM, Shelly 1 Gen 2 and Gen 3
The housing has space for up to 3 WAGO 221 clamps.
The cables are neatly and securely fixed with cable ties.
The reset button and the LED are accessible and visible.
Size: 89x46.5x20.5mm
For assembly, you will need:
4 pcs M3 brass inserts
4 pcs M3x6mm countersunk screws
2 pcs 2.5mm cable ties
2 or 3 WAGO 221 clamps
have fun!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (49)