Moana - Vaiana necklace - collier - Free 3D Print Model

Search models, users, collections, and posts

crea-J 3D

Props & Cosplays>Costumes

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.4 h

1 plate

4.7(80)

Open in Bambu Studio

Boost

559

1375

1.3 k

726

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Description

Content has been automatically translated.

Show original

✨ Moana Necklace – Two-Part Print ✨

Recreate the magnificent necklace inspired by the film Moana with this model optimized for a two-part print! Ideal for film fans, cosplayers, or simply as a unique accessory.

🔹 Model Features:
✔ Two-part printing for easy assembly.
✔ Designed to incorporate two 8x3 mm magnets. Consider using 8x2 mm magnets for easier opening and closing.
✔ Perfectly sized to accommodate @Fabs8819's Moana game pawn printed at 95%.

📌 Recommended Materials:

Filament: PLA, PETG, or any other material suitable for jewelry and accessories.
Supports: Required
Size optimized for a rapid print and excellent finish.

🖨 Link to Moana pawn:
🔗 https://makerworld.com/en/models/1030393#profileId-1013089

⚠ Printing Tip: For an even more authentic effect, use translucent blue filament for the stone!

💙 Download, print, and add a touch of Polynesian adventure to your collection! 🌊🏝

Comment & Rating (94)

@user_1636104376

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed it with PETG and it came out very well. I just rotated the model on the plate a bit to reduce the amount of spool changes down from 350odd to about 70. The bracket can do with strengthening and maybe changed slightly to allow the shell to open a bit further, minor stuff. My 2yo loves it.

@user_2978635908

Print Profile

0.2mm layer, 2 walls, 15% infill

turned out good. I adjusted the angle and also rotated them to minimize filiment changes (poop) and it turned out good. 20 degrees angle and I just sited the rotation.

@Skorlen

Print Profile

0.2mm layer, 2 walls, 15% infill

Unfortunately, an endless number of filament changes would be nice if the said upload had only 70 changes. otherwise very nice apart from where the supports were, I still have to sand and didn't have the right magnets, I used the ones from Gizeh Paper and had to work with a riser and a lot of superglue

(Edited)

Show original

@iceteabottle

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice model. The child is overjoyed!

Show original

@user_2711942270

Print Profile

0.2mm layer, 2 walls, 15% infill

Worked great with the suggested inner print

@nusi83

Print Profile

0.2mm layer, 2 walls, 15% infill

My little girl adores it

Show original

@keitoaino

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect!

@ADaxi_official

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very well done

Show original

@JWalker76

Print Profile

0.2mm layer, 2 walls, 15% infill

came out beautiful, my daughter LOVES it! Printing it vertically caused an easy break point when snapping the hinges together. I had two pendants break at a layer line when snapping them together. my filament was dried, I did use a matte white PLA so perhaps it just wasn't flexible enough. But I did get it work. I would only have two recommendations. 1. Possibly look at making it a print in place assembled instead of snapping. 2. Possibly look at making the colors separate parts

@Phmeg

Print Profile

0.2mm layer, 2 walls, 15% infill

Turned out great, my five year old loves it. she now gets to channel her inner Moana. joining the two parts takes some work, ended up exposing the joins to heat briefly to help. thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Moana/Vaiana Heart of Te Fiti Pendant

Fabs8819

4.4 k

1.2 k

117

Maui's Fish Hook (from Moana/Vaiana)

TreeD-prints

2.3 k

1.2 k