Rick and Morty mask

An odd funny mask I've made for you guys! It started to look like it was from the world of Rick and Morty, so I ran with it and this came out.

looks a little odd and uncanny when you have it on your face, but I love it. You could have more uses for it than just a Rick and Morty mask, it could be a creepy clown face or whatever your wild imaginations can come up with.

The mask is sized to my face so please resize if needed* 155mm inside wall to wall by the top holes*

Enjoy making! and have fun with it!

• pick the 0.20mm standard @BBL - mask, if possible, should have all the setting I have set on mine when printed
• if not, here are the setting I used and changed
• Tree supports (auto) default style, with a threshold of 25degrees 
• strength settings- internal solid infill pattern- Rectilinear, sparse infill pattern - Rectilinear also @ a 10% infill
• added a few more supports on the tongue to help stable it out till it reconnects to the face.
• does have some layer steps above the lip and nose but this was the best result I found when printing out so many  
• I have it set up so it could print as is as should print smoothly with no layer separations and got rid of my adaptive layer lines which cut down on print time which is always nice. 
• if you do have some set adaptive layer lines do so all the way to the tip of the tongue and bottom parts of the top teeth and lip, found that helped layer separation and reducing the steps if you want that.
• make sure filament is good and dry or may have problems, I did a few times. I dried it and printed perfectly after that.