Radiator shoe drying rack - Free 3D Print Model

Search models, users, collections, and posts

WWprints

Household>Other House Models

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

10.3 h

2 plates

4.9(14)

Open in Bambu Studio

Boost

386

953

290

105

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

BT3x14 SHCS Self Tapping Screw (20PCS) - AA201

BT3 Socket Head Cap Self Tapping Screws (SHCS)

Description

This shoe dryer sits, fits and hangs off of various radiators and holds both shoes with it's hollow towers. The towers encourage hot air from the radiator to go into the shoes to dry them quicker and more efficiently getting them ready to be worn again fast!

It fits many types and thicknesses of radiators as can be seen in the picture and holds your shoes on securely while drying simply by slipping them onto the towers.

Assembly can be achieved simply by gluing the towers in, or by also screwing them together as in the print profile models. I added the screws in after for extra security but they are not present on the dryer in the photos showing that it works perfectly with or without them.

I would suggest printing in PETG to reduce the risk of deforming as it will be exposed to hot radiators.

Boost Me (for free)

Please boost my model if you like and use the dryer. Thank you!

shoe rack

shoe dryer

shoe holder

Comment & Rating (38)

@olsonkiel

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

love it

The profile uploader has replied

@user_2856272752

Thanks for the rating. Glad it works well for you. Please give my model a boost and follow me if you can to support my work. Thanks!

@MidianPrints

Print Profile

0.2mm layer, 2 walls, 15% infill

works great! Used SUNLU PETG blk,Generic PETG .16 profile. Came out great, I printed at 125% after the 5th layer. would have been better if I let it print normally, will be print 3 for the family.

The profile uploader has replied

@user_2856272752

Thanks for the rating. Glad it works well for you. Please give my model a boost and follow me if you can to support my work. Thanks!

@gelon

Print Profile

0.2mm layer, 2 walls, 15% infill

Thank you, WWprints. It doesn't seem to do a big difference, but keeps the shoes/sneakers on top of the radiator, so I'm fine with that. Printed in regular PETG from GEEETECH and it doesn't warp whatsoever.

(Edited)

The profile uploader has replied

@user_2856272752

Thanks for the rating. Glad it works well for you. As much as a dryer it's nice to just warm your shoes up before putting them on on a cold day. Please give my model a boost if you can to support my work. Thanks!

@user_2066605208

Print Profile

0.2mm layer, 2 walls, 15% infill

Maybe in PLA so far it work awesome!

The profile uploader has replied

@user_2856272752

Glad it works well for you. Please give my model a boost if you can to support my work. Thanks!

@Arsethorpe

Print Profile

0.2mm layer, 2 walls, 15% infill

printed nicely in petg, currently drying my boots, perhaps a version with hex holes for m3 nuts would be good?

The profile uploader has replied

@user_2856272752

Thanks for the rating. Glad it works well for you. Please give my model a boost if you can to support my work. Thanks!

@ArtyP

Good idea but I think if you recommend using a strong filament like carbon fibre PETG than that would be good because it could be prone to warping

The designer has replied

@user_2856272752

Thanks for the feedback. I don't have any carbon fibre to try but had no issue with mine. Perhaps my radiators run a bit cooler than yours do. I guess if you have a screaming hot one it could be an issue. Please let me know if you try the carbon fibre out and how it works out. Thanks!

@ArtyP

Replying to @user_2856272752 :

Okay I was just thinking it could happen over time with it’s thin walls but I guess the thinnest part is further away from the radiator. nice design btw

@user_2447457750

Boosted

Printed perfectly.

The designer has replied

@user_2856272752

Thanks for the boost. Glad it works well for you. Please follow me as well to support my work. Thanks!

@user_2750198913

Boosted

The drying rack was already multiple time in use...I will need to print more of them : ))

The designer has replied

@user_2856272752

Thanks for the boost. Glad it works well for you. Please follow me as well to support my work. Thanks!

@user_2750198913

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Easy assembly and fits very well on my radiator. Thanks for the model : )

The profile uploader has replied

@user_2856272752

Thanks for the rating. Glad it works well for you. Please give my model a boost and follow me if you can to support my work. Thanks!

@wisteria

I don't have a radiator anymore, but I can't believe I never had this when I did! Fantastic idea.

The designer has replied

@user_2856272752

Thanks for the comment. Please give my model a boost if you can to support my work. Thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.