Tacobelli cyclotron replacement board mount post

This is a replacement mounting post for the Tacobelli cyclotron mod to fit the Frankengeek light and sound board as the posts don't line up.

Step 1 : print this model and remove supports

Step 2 : drill out the 2 holes on the top of the replacement post with a 5/64 drill bit

Step 3 : break off the bottom post on the cyclotron

Step 4 : screw the replacement post to the bottom mounting holes of the light and sound board (make sure the holes are facing down away from the board)

Step 5 : if gluing apply glue to the bottom legs of the replacement post and seat it into the cyclotron to were you can screw in the top screws and screw them in ( i used 3D Gloop)

and you are finished! Happy Ghostbusting!!