Dust Collector Pipe Mounting Bracket
Print Profile(5)
Bill of Materials
- M4x20 - Socket Head Cap Screw x 2: Optional
- M4 - Nut x 2: Optional
- M4 - Washer x 2: Optional
Description
Description
This is a bracket for mounting dust collection pipe to anything you can put a screw in. The bracket snaps together with a double dovetail and should not need extra fasteners. An area for a captive m4 hex nut and 20mm socket head cap screw is provided for those who prefer to lock it down tight. There is a small slit in the side for separating the halves with a screwdriver should you need to remove the bracket in the future. The holes in the base provide clearance for up to a #10 cabinet screw. I recommend using cabinet screws (ie: washer head screws) for mounting to avoid splitting the model along the layer lines as can easily happen with a typical wood screw with a wedge shaped head.
Available Profiles
- 4 in SDR35 PVC pipe
- 6 in SDR35 PVC pipe (needs fit verification)
- 6 in spiral pipe (needs fit verification)
- 3 in Schedule 40 drain pipe
Print notes
- This printed very well in PETG (as seen in pictures), but it should print just fine in PLA.
- Supports are not required, but are included in the default profiles as I like my holes round
- The fit is quite tight by design as it means you don't need to use any extra hardware to hold the halves together if you don't want to.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (41)