Custom Logo plate Husky C271H 200PSI Compressor

Simple replacement logo plate for Husky compressor Model #C271H 200 PSI 27gallon tank. 

Add your own logo or working. 

I printed mine in on a P1S with AMS, eSun PLA+ with a .6mm nozzle only because I couldn't be bothered to change it. I will eventually make it in PETG or better. 

the model tends to peal up in the corners. I used a glue stick, and it seemed to sort the issue out. +

I included a .stp file for easy editing. 

plate fit perfectly on my compressor. 

To take out the old plate and install the new one:

first make sure the compressor is off, and un-plugged because the piston and pully are under the cowlings that you are about to open.

you will need to remove 4 screws from the housing 2 on the bottom 2 on top

then pry to two halves apart. slide out the old plate and slide in the new. reverse the above procedure.