Lumberjack LED Lamp
Print Profile(1)
Bill of Materials
Description
Here you will find a beautiful lumberjack lamp that you can easily print yourself.
Recommended Print Settings:
Main Body: For optimal detail, ideally print the main body with a layer height of 0.16 mm. To save time, you can increase it to a maximum of 0.2 mm
Back Panel: Ideally print at 0.20 mm. MAX 0.24!!
Diffuser: This version ensures a gentle light distribution, making the light more atmospheric.
The back panel does not fit so tightly, as I glue it firmly before selling. This makes the assembly of the back panel easier for me. You can increase the back panel by 0.5% and see if it fits a little tighter.
- You should firmly glue the support for the LED strips with some plastic adhesive.
- Then you need to insert the LED strips. Since most LED strips have adhesive on the back, I use the supports to prevent them from detaching due to the heat generated by the COB LED strip.
- The LED strip should be at least 74cm long
I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback!
Happy Printing!
Membership
Information on commercial licensing on MakerWorld
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)