Pistachio opener - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Stheiner 3D

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.5(47)

Open in Bambu Studio

Boost

201

595

894

657

Released

Description

Simple and fast to print opener for pistachios, nuts.

This model was originally created by tomato18 (https://www.thingiverse.com/thing:4792654). I modified the handle and walls to improve the design. Shared under the same CC-BY license, giving credit to the original creator.

Comment & Rating (51)

@Chewbecka

Print Profile

0.2mm layer, 2 walls, 15% infill

Great! although had to print twice as when removing the brim from the first one it snapped in half. go easy!

@swqgmessiah

Print Profile

0.2mm layer, 2 walls, 15% infill

Worked very well

@_Solidman

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect, works very well

Show original

@Marco_L_77

After I reworked the non-printable bad STL file again, the model printed well. I printed it in PETG and it is very stable and fully serves its purpose. I have used it several times already and it has not broken. If anyone wants the revised STL file, they are welcome to contact me

Show original

@d.horak93

Print Profile

0.2mm layer, 2 walls, 15% infill

good model.

@user_3558442205

Print Profile

0.2mm layer, 2 walls, 15% infill

good

@user_1901203890

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:looks like the floor is not thick enough and since I’m a beginner, I don’t know how to change the model file to make it thicker. Tried with both PLA and PETG with same results. Other prints do not show any similar problems.