O.T.C. Only Tested Cameras

cover

IMG_20250205_141545367.jpg

IMG_20250205_141556402.jpg

IMG_20250205_141530067.jpg

foto2.jpg

plate_1.png

2025-02-05_44e73fb800af8.jpg

<ul><li>0,24 layer height</li><li>4 walls</li><li>10% infill</li><li>petg</li><li>fuzzy skin</li><li>max 150mm/s  for outer perimeter</li></ul>

0.24mm layer, 4 walls, 10% infill

Leica M2 & M3 Hand Grip, Screws, and Viewfinder Hood

Questo è il remix di un ottimo modello, ringrazio <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/chrismofer">chrismofer</a> che ha creato l&#39;originale (che uso normalmente sulla mia Leica M3).Mi serviva qualcosa di analogo per la mia Olympus TRIP 35, non avendone trovati in giro, ho deciso di adattarlo. il risultato potrebbe essere migliore al livello estetico, ma risulta comunque molto funzionale e robusto.Consiglio il PETG di colore chiaro o trasparente, per evitare deformazioni dovuti ad ambienti caldi e soleggiati.Stampato con A1 mini, 0,4 nozzle,PETG white, 4 perimetri, 10% riempimento, 0,24 layer, fuzzy skin, 1,4 ore circa.<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Fatemi sapere! grazie.</boostcontent></boostme>

This is a remix of an excellent model, I thank <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/chrismofer">chrismofer</a> who created the original (which I normally use on my Leica M3)I needed something similar for my Olympus TRIP 35, not having found any around, I decided to adapt it The result could be better aesthetically, but it is still very functional and robustI recommend clear or transparent PETG, to avoid deformations due to hot and sunny environmentsPrinted with A1 mini, 04 nozzle, PETG white, 4 perimeters, 10% infill, 024 layer, fuzzy skin, approximately 14 hours<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Let me know! Thank you</boostcontent></boostme>

Olympus Trip 35 Hand Grip

ASIA

Print Profile(1)

Description

Comment & Rating (4)

This remix is based on

License

Related Models