Camila Cabello HueForge 4 Color

Continuing my series of HueForges of famous women, here is Camila Cabello.

As with all Hueforges, the transmission distance (TD) of the filaments used is pretty crucial.  I use filament from readily available manufacturers in the UK, so as much as possible, please stick to the filaments listed, or check the TD of any you substitute (especially the white).

Before printing, make sure your plate is clean.  I often have adhesion issues with larger prints (especially flatter ones like HueForges) - they are nearly all solved by cleaning the plate.  I've also started using 3Dlac - it's not cheap, but a little goes a long way and I recommend it highly.  I also always print HueForges using PLA.  PETG will work, but looks shinier than PLA, and that's not usually desirable.

If you're going to resize this in the slicer, please don't touch the Z axis!  This is vitally important!  Only resize the X & Y axes, and realise that your results may vary from what is intended in my print profile.

If you like any of my designs, please leave a review.  I'm always open to constructive criticism and view it as the best way to improve.  If you have any requests, please ask and I'll see what I can do.