YAHTZEE! YAHTZY! YAMS!
Print Profile(2)
Description
Boost Me (for free)
you admit that this model deserves to be boosted, right?
The first set of YAM'S printed! (well, I think so!), or simply the very first set of yam's of my design.
Aside from the filament, you will need:
5 x 608 ball bearings.
5 x ballpoint pen springs (adjust the length if needed).
10 x M4X20mm screws.
And.... that's it!
The sliders have a grooved bottom to avoid friction, but you can always add a small drop of lubricant.
The bearings will need to be degreased, cleaned and then lightly lubricated with a three-in-one oil.
Below is the assembly video.
For those who are resistant to the printing profiles of others, the five push buttons will need to be printed flat, otherwise the mechanism will have too much friction and will not work.
If the bearings have trouble getting into their supports on the base, do like me, sand a little until it fits without forcing, but still with a slight resistance.
This design took me a long time to imagine, design, draw, start over, several weeks of my life. So, read all the lines of the description carefully, respect the assembly orders shown in the video, and your Yam's game will work wonderfully, like all the models I have printed for myself and my friends.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)