filament winder for drill
Print Profile(1)
Description
The 3MF file is designed and adjusted for a Creality K1 Max with Eryone PETG-CF.
The result is perfect, and so is the solidity,
the hexagon must be glued into the hole with glue.
The hexagon is set to 100% infill.
The other two elements are at 18% infill with 4 walls and gyroid infill.
The thread must be cleaned with a die, and I used an 80mm M6 screw to assemble the two parts.
It fits all the spools I was able to test once the screw stops in the screwdriver side part, if it unscrews from the other side and allows tightening the two parts.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)