Eiffel Tower Memorial - 3 Color, No Support, 7"

The Eiffel Tower Memorial replica done in the French Flag colors in 2015 in tribute of the deadly attacks on Paris. 

Optimized for a no-support print profile with the 0.4mm nozzle (some of the small details have been slightly enlarged to allow for easy printing with a .4mm nozzle) The provided print profile is for a .16mm High Quality print profile and prints nicely in using bambu PLA in Red, White and Blue colors using the AMS. (can be printed without the AMS by manually swapping out the filament at the 2 color changes). 

The provided scale print in approximately 7.2" tall. Have test-printed scaled up to 130% in a single-part print, and up to 200% in a 3-part print. 
 

 If scaling to smaller than 100% consider bumping up layer resolution to .12 or .08 mm High Quality print profile as well as changing over to a .2mm nozzle for better detail resolution. 
 

A couple of my other Eiffel Tower models also avialable with links below:

• 3-piece, 200% scale model now: https://makerworld.com/en/models/1067918#profileId-1057183
• 1-piece, 100% & 130% single-color model: https://makerworld.com/en/models/1063183#profileId-1051801
• 1-piece, 50% and 25% .2mm nozzle model: https://makerworld.com/en/models/1071429#profileId-1061397

The 100% scale print results in approximately 7.2 inch tall tower, the 130% scale print yields a 9.5" tall model. 

Thank you for visiting my page and taking the time to print my models. Your support is truly appreciated. I never expected to have so many people following me and fueling my passion for creating the models that I create!