IKEA Linnmon/Lagkapten to Adils Leg Connector

A practical connector for joining two IKEA Linnmon or Lagkapten tables by their Adils legs.  
It slides directly onto both legs, keeping the tables perfectly aligned and preventing them from drifting apart.  
No screws or glue required — just a clean, reusable way to create a larger and more stable workspace.

Usage

Place the two tables side by side so that the tables touch.  
Align the connector and gently slide it onto both legs.  
The fit should be snug; if it’s too tight, slightly sand the inner surface or print at 99–101% scale.  
 

Print Settings

Material: PLA (recommended) or PETG for added strength  
Layer height: 0.2-0.25 mm  
Infill: 10–30%  
Supports: Not required  
Orientation: Legs' axis parallel to print bed  
Print time: ~1 hour (depending on printer and settings)