MSK Designs

cover

Sitka Light Box v1_be698921-f1ed-4555-b8cc-e21525cb8dbd.png

Sitka Light Box Cover

plate_1.png

Sitka Back Cover

plate_2.png

Sitka Light Box v1_be698921-f1ed-4555-b8cc-e21525cb8dbd.webp

plate_1.webp

plate_2.webp

IMG_0611_9625c43d-1314-41a9-9063-7a01d083f1e2.webp

Two color design, pre painted.Change colors as you wish.I desinged the edges to be black to allow less light bleed through the sides.This is designed for two plates and fills up the P1S or X1C plate. You can make the design smaller, just make sure that you match the size to the back plate and resize them both by the same percentage.&nbsp;UPDATED 12/25: I made the front face of the light box 1mm thick instead of just .6mm. The first one I printed, my son was able to push the black logo out of the light box. It didn't bond with the white and any pressure on it would make the two seperate. The thicker layer fixed this.

0.2mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Sitka Hunting Gear Logo Light Box.This box is designed with Sitka&#39;s Logo and meant to be hung on the wall. There is a hanger slot on the back to hand this on a push pin or nail and then also an 8mm hold on the bottom to run your LED wiring through.&nbsp;Just run the led strip light around the edge of the box and it will illumiate the hole design.

Sitka Light Box

ASIA

Print Profile(1)

Description

Comment & Rating (12)

License

Related Models