9mm Sliding Lid Ammo Case - 50 Rounds - Free 3D Print Model

Search models, users, collections, and posts

KICKIN3D

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

9mm case, tray, and lid on 1 plate

Designer

1.8 h

1 plate

4.6(37)

Lid with added slits for grip

Designer

27 min

1 plate

4.9(9)

Resized Tray - for easier fitment

Designer

26 min

1 plate

4.3(4)

Open in Bambu Studio

Boost

130

262

625

439

Released

Description

9mm ammo case with sliding lid. Holds 50 rounds. Fits most 9mm variants up to 9mm Winchester Magnum, which is @ 29.5mm in length. So any 9mm variant that's 29.5mm and less in length should fit.

If the tray doesn't fit snug: Place a drop of superglue on each post and then press the tray onto the posts. Let the glue fully dry and before placing ammo inside, or before sliding the lid on. This is to prevent any superglue residue or “bloom” from getting on your ammo and lid.

When printing the tray that you stick the rounds into you may have to adjust the X-Y hole compensation, depending on how well your printer is calibrated. I printed on 2 separate Bambu Lab machines without having to adjust it and both fit the ammo perfectly, but I figured I'd post this info just in case.

If lid it too loose/tight when sliding you can scale the Y-Axis up/down by 0.2. If you do this make sure that Uniform Scale is NOT checked and only the lid is selected

Printed at a 0.20 layer height.

12-25-2023

Added profile for tray that is easier to put in.
Added profile for a grooved lid for easier grip when sliding it on/off.

Comment & Rating (62)

@ThorpeCollins78

On a whim, I printed this in Resin on an Elegoo Mars 5 ultra and the print looks amazing! If you print with Resin this is definitely going to need to be sanded, the holes for the shells is just a TINY bit small, the rounds fit but they are snug in there. A little sanding and clean up then a 2k clear coat and it should be perfect.

The designer has replied

@KiCkiN

That's wild! I've never used resin (Id love to, but I only have 1 lung and a list a respiratory issues) but that looks sick!

@kaiserben

Print Profile

9mm case, tray, and lid on 1 plate

Printed fine, but the tray and lid are loose. I know the description says to use glue for the tray, but that doesn't stop the lid from sliding off.

The profile uploader has replied

@KiCkiN

If lid it too loose/tight when sliding you can scale the Y-Axis up/down by 0.2. If you do this make sure that Uniform Scale is NOT checked and only the lid is selected

@stefanobaraldo1

Print Profile

9mm case, tray, and lid on 1 plate

consistently made easy and quick to print

Show original

@infamous_shadow

Print Profile

9mm case, tray, and lid on 1 plate

came out amazing

@Amn2009

Print Profile

Lid with added slits for grip

Printed this for the ammo box, and no issues at all. Nice print.

@Amn2009

Print Profile

9mm case, tray, and lid on 1 plate

Very nice model and prints great. :-) Lid was a bit lose in my print, but just printed directly from Bambu Handy, and did not try any tweaking. I did print the profile/plate with the separate lid as well, and that actually fits better so not going to need to re-print anything. 😊

@saffa5doc5

Print Profile

9mm case, tray, and lid on 1 plate

second time the round holes has messed up

The profile uploader has replied

@KiCkiN

Im sorry but I dont understand what that means. It could mean a lot of different things. What do you mean by "messed up?"

@saffa5doc5

Replying to @KiCkiN :

the holes for the rounds kept failing, there didn't print the same as the file was downloaded to print

@user_3162014895

not for 9x21 bullet. but good

The designer has replied

@KiCkiN

Never heard of those. I have heard of a 9mm Italian. Not sure if that's the same thing but this case doesn't fit those.

(Edited)

@user_2319736802

Print Profile

Resized Tray - for easier fitment

A little too tight of a fit for bullets

The profile uploader has replied

@KiCkiN

This can vary from printer to printer because of flow, excessive nozzle wear, K-factor, etc. You can adjust for this using this using the X-Y hole compensation in the slicer. Pic included.

@Patrickd39601

Print Profile

9mm case, tray, and lid on 1 plate

Ammo fit. good quality box

The profile uploader has replied

@KiCkiN

Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.