Eiffel Tower - 3-piece, No support 14" Print - Free 3D Print Model

Search models, users, collections, and posts

ShapeShift 3D Creations

Art>Sculptures

IP Report

Print Profile(2)

All

P1S

H2S

H2C

P2S

H2D

X1E

P1P

X1 Carbon

H2D Pro

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

16.4 h

1 plate

4.8(79)

0.2mm layer, 3 walls, 10% infill Add Support 3color AMS

15.8 h

2 plates

4.6(5)

Open in Bambu Studio

Boost

763

1588

111

109

2.2 k

691

Released

Description

Boost Me (for free)

Boost me to support the creation of even more awesome models!

The Eiffel Tower replica with a no-support print profile. Some of the small details have been slightly enlarged to allow for easy printing with a .4mm nozzle. The print profile is a 200% scale of my original file loaded earlier. This profile is done in a 0.2mm layer profile height and printed in 3 pieces. You will need some sort of a glue (I used CA glue, but hot glue also works very well) to put the 3 pieces together. Really easy to align and glue together.

This 200% scale print is 14" tall. My other available profile is 100% scale print results in approximately 7.2 inch tall tower, the 130% scale print yields a 9.5" tall model. My Other Eiffel Tower models listed below:

1-piece, 100% & 130% single-color model: https://makerworld.com/en/models/1063183#profileId-1051801
1-piece, 50% and 25% .2mm nozzle model: https://makerworld.com/en/models/1071429#profileId-1061397
1-piece, 100% 3-color model: https://makerworld.com/en/models/1071421#profileId-1061385

Thank you for visiting my page and taking the time to print my models. Your support is truly appreciated. I never expected to have so many people following me and fueling my passion for creating the models that I create!

Comment & Rating (111)

@user_3460015963

Boosted

Printed great! The arches at the bottom needed some small cleaning up, but it turned out great overall. I used black PLA and painted it using Krylon Metallic Gold Leaf paint, and it looks almost identical to the 3D preview image

(Edited)

@user_2962653860

what colour filament did you use for that? looks awesome

@user_3460015963

Boosted

Replying to @user_2962653860 :

Thank you! I used black PLA and painted it using Krylon Metallic Gold Leaf paint.

@Smoking_Head

Print Profile

0.2mm layer, 3 walls, 10% infill

A truly exquisite model. Unfortunately, the print result without supports is somewhat underwhelming. Printed with calibrated Bambulab Bronze. However, with some post-processing, a handsome tower is still attainable

The profile uploader has replied

Show original

@AEMravan

Sorry you had some issues with arches! Looks like not all material behaves the same with these overhang regions.. I'm glad you were able to clean it up manually, that Bronze material looks amazing for this model!

@woody59

It is true that the Eiffel Tower is a very tedious design. I have printed a few of them and, despite the good tuning of the machine and the right filament, one is not immune to potential defects given its tedious design

Show original

@gianluca_1988

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

@user_4219932986

Boosted

My longest print by far at almost 17 hours, but love it

The designer has replied

@AEMravan

fantastic color choice!

@user_4219932986

Boosted

Replying to @AEMravan :

Yeah really pleased with it

@user_1023795183

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Great model, printed without suports very little cleanup needed on overhangs, used matt pla, divided into 4 pieces to fit a1 mini, worked well.

@user_3584656222

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Very nice!!! Thank you very much!

@user_1412501052

Print Profile

0.2mm layer, 3 walls, 10% infill

Excellent print of the 14” version. No issues. Even managed to clear a spool of remnants to the last 5”. It was a Stronghero tri-color that gives a metallic finish along with striping. You can’t see striping until close up. A fun addition.

@FoxCube

Print Profile

0.2mm layer, 3 walls, 10% infill

Awesome design, but still needs support under arks.

@BroCast

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Truly exquisite work, exceptionally well done

Show original

@jdh96romeo

Print Profile

0.2mm layer, 3 walls, 10% infill

Had a few cosmetic issues towards the base, but I'm happy with it. Originally, I used Bambu Lab silk PLA, but that was too brittle but the matte PLA worked well.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.