Monitor Light 24 inches
Print Profile(1)
Bill of Materials
Description
In my office, I didn't have enough light to illuminate my 2 monitors, so I thought: 'I have a 3D printer, instead of buying them, I'll make them myself!
This support is mountable on 24-inch monitors, which have screws at the back for wall mounting with a distance of 10 cm between them (not the diagonal).
It can hold 2 LED strips of 45 cm, and if you are skilled and precise in assembly, it can hold 3, but I can't guarantee that.
The electronic components I used are:
1- LED power supply/transformer from 220V to 24V (always check the power consumption based on the strip and the number of LEDs you plan to use)
2- 24V dimmable switch with connectors
3- 24V cable with a connectors: I cut the male connector and I used to pass through the support)
4- 24V natural light COB LED strip (which I already had at home from a previous project)
(Optional) 5- 2-way splitter 24v (since I had 2 monitors, this was necessary)
6- Strip Led connectors
Obviously, if you have old components from other projects at home, you can freely use those (you'll spend less and recycle old stuff)."
I’m adding a PDF with the assembly instructions, it’s very easy if I was able to do it! =)
I Hope you find it usefull!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)